The Micro 1000® web guide controller delivers the highest level of web guide accuracy in the industry. It easily interfaces with all of AccuWeb’s dynamically compensated WideArray™ and standard edge detectors, AccuBeam® 3 line guide, and light- to medium-thrust linear actuators — all in one, compact enclosure.

The Micro 1000 provides accurate, reliable,
cost-effective performance.
 

Remote guide point adjust station

 • Digital Speed and Accuracy — Automatically calibrates the web guide system for environmental changes, web process contamination and web edge changes every 4 milliseconds.
• Operator Friendly — Intuitive touch pad interface with LED indicators. Setup parameters are located inside the controller, safe from inadvertent adjustments.

Dynamically compensated edge detectors

• No Setup Downtime — The system performs continuous automatic calibration of edge detectors through AccuWeb’s exclusive dynamic compensation process.
• Network Friendly — An optional discreet PLC I/O (Performance Logic Controller Input/Output) board allows remote control of the Micro 1000.

Digital line guides

 • Easy Installation — All components are contained within this single enclosure – reducing interconnections and easily installs on web guide equipment next to the web guide frame.
• Applications — Linear actuators can be applied to guide frames (both positive displacement guides and steering roll guides), unwind stands, winders, rewinders, coilers, and uncoilers.

High performance
electromechanical actuators (150 – 1500 lbs of thrust)
• Ratings — Enclosure is rated IP65 for protection from harsh environments, and designed to UL, EUL, CUL, CE and FCC codes. Reference UL certification at www.ul.com.
 
You’ll always get more value from AccuWeb
• PWM (Pulsed Width Modulated) actuator motor drives for quick, accurate response.
• Compact self-contained design requires no additional boxes or drives.
• Capable of web oscillation and electronic guide point adjustment.
• Ideal for laminating applications, software controls the positioning of one web relative to a second web or multiple webs.


 Common Micro 1000 applications

 
                                    
Controller Comparison
System Capabilities Micro 1000 Micro 4000 NET
Microprocessor-based ■ ■
No calibration needed ■ ■
8-button switchpad with Servo-center ■ ■
Class I, Div 1 environment capable   ■
PWM drive ■ ■
Adjustable Servo-gain control ■ ■
Auto-recovery after power interruption ■  
Optically-isolated inhibit function ■ ■
Optically-isolated fault indicator output Optional
Drives brushed DC motors ■ ■
Drives brushless DC motors   ■
Compatible actuator maximum load weight 5,000 lbs. 100,000 lbs.
Edge/Line Detector Compatibility
WideArray® Edge Detectors ■ ■
High-temperature edge detectors   ■
AccuBeam® 3 digital line/edge guide ■ ■
Network Compatibility
Analog signal inputs, signal outputs   ■
Discreet PLC I/O Optional ■
ControlNET capable   ■
DeviceNet capable   ■
Modbus Plus capable   ■
Ethernet capable   ■
Profibus capable   ■
Web Guide Capabilities
Web width monitoring   Optional
Oscillation at a static rate Optional Optional
Oscillation rate based on line speed   Optional
Web randomizer Optional Optional
Edge/Line loss detection ■ ■
Remote guide point adjust Optional Optional
Chaser/Slave ■ ■
Master/Follower   ■

Specifications
Input Voltage:  
90-132 VAC or180-264 VAC,
50/60 Hz, 1-phase		  
Touch Pad Control Functions:
• Edge A Select
• Edge B Select
• Centerline Select
• Actuator Retract
• Actuator Extend
• Automatic Mode
• Servo-center Mode
• Manual Mode
• Wash Down
 
Enclosure:
• IP65 rated
• Cam-locked door with double-bit
   insert key
• Chassis mount available
 
Temperature:
• 30ºF (0ºC) – 125ºF (52ºC)  
   
Interface Compatibility:  
• Optional PLC interface  
   
Options:  
• Oscillation  
• Randomization  
• Chaser/Slave web guiding  
• Remote guide point adjust  
• Remote line guide adjust  
   

 

 Print/Download Micro 1000 Brochure

AccuWeb® - Copyrights, Disclaimers & Privacy Statement  |  Back to Top