|
Tighter customer tolerances
require precise web converting. AccuWeb’s patented systems provide
accurate, reliable
web guidance.
|
|
Design
to fit all Mark Andy 819, 820
and 830 label presses.
|
This economical drop-in
system is designed to add a web guide or replace an existing one. The
system includes a Micro 1000® digital controller, specially designed
PointSourceTM edge detector, and a compact AccuGuideTM PDG-PS positive
displacement guide structure.
|
|
|
|
|
|
Benefits of
the Mark Andy 800 series retrofit
guide system: |
|
Compatible with the
Micro
1000 controller |
 |
• Easy
Installation — Adding an AccuGuide system to
your Mark Andy 800 series label press is simple and straightforward. |
|
Special edge detector
allows for maximum
web widths |
 |
•
Dynamically Compensated — Our exclusive technology automatically
adjusts for all environmental, process and web edge changes -
temperature, relative humidity, barometric pressure, dirt, dust, Oxi-Dry,
nitrogen additions, web flutter, or passline variation. |
| • Any Web
Material — Our edge detectors sense all web materials - paper, film,
foil, nonwovens, mesh, metals, virtually any web - regardless of opacity
level or density. Select either compensated ultrasonic or compensated
infrared technology depending on materials. |
|
Specifically designed
for
the Mark Andy 810,
820 and 830 |
|
| |
| • Totally
Automated — No Maintenance — Edge detectors self-calibrate
automatically. No operator adjustment necessary - resulting in faster
make-ready. |
|
Easily replaces existing
web guide system |
|
• Other
Retrofits Available — Retrofits available for all makes of presses
including Mark Andy, Comco, Allied Gear, Propheteer, Aquaflex, Rotopress,
Nilpeter, and others. Please contact AccuWeb for details. |
|
Specify AccuWeb for your
next equipment or replacement web guide -
and experience the digital difference. |
|
You’ll always get more value from
AccuWeb
• The compact PDG-PS/800 series is a cost
effective path to improved Mark Andy performance.
• PWM (Pulsed Width Modulated) actuator motor drive for quick, accurate
response.
• All systems include an actuator with automatic servo-center and
end-of-travel internal limit switches.
• Systems come with Micro 1000 controller, edge detector, actuator, and
guide assembly.
• A proprietary linear bearing system is used to reduce friction and wear,
allowing for a faster, more accurate response.
• The unique bearing system is designed to position the pivot point exactly
on the incoming plane to ensure guide accuracy.
Mark Andy 800 series installation instructions |
|
Remove manual
unwind adjust knob, shaft, sprocket, and chain.
1) Install guide
using a 3/4” hole in rear machine frame, locating pin, washer, and cap
screw.
2) Orient guide vertically and tighten cap screw.
3) Drill and tap a 3/8-16 hole at A or thru hole if appropriate. Tighten
screw.
4) Locate system controller in a convenient location.
5) Connect the edge detector and guide cables to the controller.
6) Refer to installation manual for setup and operation.
Guide Model Information
Mark Andy 810/820/830 7”
• Guide Model 8.50501
Mark Andy 830 10”
• Guide Model 11.50501 |
 |
|
AccuWeb® -
Copyrights,
Disclaimers & Privacy Statement |
Back to Top |
|
|
